catalog symbol: tvss physical size: refer to dimensional data construction: melamine tube nickel plated brass end caps voltage rating: 600vac interrupting rating: 200,000a rms sym. agency approvals: ul recognized 600vac, file e56412 catalog symbol and surge ratings catalog 8x20 s melting i 2 t clearing i 2 t ipeak @ 100ka number surge rating (a 2 s) (a 2 s) 60 hz (a) tvss-5 5,000a 559 1,650 4,283 TVSS-10 10,000a 1,788 5,766 6,618 tvss-15 15,000a 3,760 9,730 7,843 tvss-20 20,000a 6,020 14.000 8.594 general information: designed to protect tvss systems per ul 1449 second edition requirements. able to withstand 8x20 ?ec surge pulses without opening. limiters are identified by a surge rating and not continuous current rating. transient voltage surge suppression limiters tvss form no. tvss page 1 of 3 data sheet: 2141 bussmann 9-01-04 sb04303 ce logo denotes compliance with european union low voltage directive (50-1000vac, 75-1500vdc). refer to data sheet: 8002 or contact bussmann application engineering at 636-527-1270 for more information. recommended fuseblocks/fuseholders for 13/32?x 1-1/2?fuses see data sheets listed below ?open fuseblocks - 1104, 2104 finger-safe fuseholders - 1109, 1102, 1103, 1151 ?panel-mount fuseholders - 2114, 2113, 2108, ?in-line fuseholders - 2127, 2126 dimensional data tvss-( ) tvss-( )-01 above catalog numbers are available with printed circuit board tabs. when ordering, use suffix ?01?
time-current characteristic curves?verage melt bussmann 30 100 1,000 2,000 current in amperes 100 10 1 .1 time in seconds ampere rating 200 300 tvss-5 TVSS-10 tvss-20 20 .01 transient voltage surge suppression limiters tvss form no. tvss page 2 of 3 data sheet: 2141 9-01-04 sb04303
transient voltage surge suppression limiters tvss form no. tvss page 3 of 3 data sheet: 2141 9-01-04 sb04303 the only controlled copy of this data sheet is the electronic read-only version located on the bussmann network drive. all othe r copies of this document are by definition uncontrolled. this bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with desig n applications. bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. bussmann also reserves the rig ht to change or update, without notice, any technical information con- tained in this bulletin. once a product has been selected, it should be tested by the user in all possible applications. time-current characteristic curves?eak let-through rms symmetrical current in amperes x100 3 10 200 2 10 100 3000 100 1000 5 10 instantaneous peak let thru current in amps x100 current in amperes x100 15 20
|
